End fittings

Using the correct end fittings are of great importance for a good installation and optimal life span of gas springs. In our range  you will find a wide selection of end fittings in steel, plastic and stainless steel 316. From ball joints, eyelets, forks and rod ends to brackets. We also make produce custom made end fittings. Order your end fittings at Brimotech and benefit:

  • End fittings for every type of gas spring
  • More than 20 years specialist for end fittings
  • Custom made end fittings
  • Delivery within 24 hours possible

For more information about our end fittings or for a free quote, please contact us. We are happy to help you!

“Very professional support by Brimotech. The end fittings are just perfect. Thank you for your expertise!”

Wide range of end fittings for each type of gas spring

We have a wide range of standard end fittings in stock, where you benefit from fast delivery. All types of end fittings in steel, plastic or stainless steel 316 are possible. So you will always find the correct end fitting for your gas springs.  Next to end fittings, you will also find dampers at Brimotech. Looking for a specific end fitting? No problem. We are happy to engineer this for you

Our standard end fittings

In our range you will find the standard end fittings on stock. Find out more about the different types of end fittings below.


  • Balljoints

    Ball joints are particularly suitable when it is difficult to mount the gas spring in a perfect straight line between both pivots. A ball joint prevents the piston rod from being overloaded on the guide and seal. This increases the life span of the gas spring.

    Explore our range of balljoints


  • Eyelets

    Eyelets ensures that we can guarantee the correct total length with a standard gas spring. The gas springs are equipped with a metric thread. We supply eyelets in many different sizes and in various types. We are happy to help you find the correct type of eyelets for your gas spring.

    Explore our range of eyelets


  • Gaffel

    Clevises

    Do you have a gas spring in which the end fittings has to deal with high forces? Then a clevis is a suitable solution. Clevises can withstand heavy forces in push and pull direction. It is important to mount the gas spring in a straight line between the fixing points.

    Explore our range of clevises


  • Stangkop

    Rod Ends

    Are you looking for an end fitting that can be used in a construction where a combined axial and radial load can occur? Choose a rod end. Our rod ends have a low frictional resistance and require no maintenance after assembly.

    Explore our range of rod ends


  • Brackets

    Brackets

    Is it not possible to install the gas spring, fitted with your connecting parts, directly in your application? Then our brackets are often a good solution. We have a number of standards in steel and stainless steel 316 on stock . Of course, we also produce custom made brackets.

    Explore our range of rackets

  • Aansluitdelen op maat

    Custom made parts

    At Brimotech we have our own engineering and production capacity in Italy. In this way we can provide you with any desired end fitting or bracket your gas spring. Whether it concerns a special balljoint or eyelet, we will be happy to produce the perfect parts for you.

    Explore our custom made range

Wondering which product you can use best in your application? Let us know your wishes and we will make a tailor-made calculation for you. Fill in the contact form below or contact us on +31 0320 769 103.

    [anr_nocaptcha g-recaptcha-response]