Our steel gas springs are standard black painted with chrome plated piston rod. Standard suitable from -20°C up to +80°C equiped with NBR seals and standard extra grease chamber.
|Type||Ø Cil||Ø Rod||Stroke [mm]||Force [N]||Min L [mm]|
|124||12 mm||4 mm||min 20 | max 120||min 20 | max 150||2x stroke + 30|
|156||15 mm||6 mm||min 20 | max 250||min 20 | max 400||2x stroke + 30|
|198||18,5 mm||8 mm||min 20 | max 350||min 50 | max 700||2x stroke + 41|
|2208||22 mm||8 mm||min 20 | max 350||min 50 | max 700||2x stroke + 41|
|2210||22 mm||10 mm||min 50 | max 500||min 100 | max 1300||2x stroke + 41|
|2810||28 mm||10 mm||min 50 | max 550||min 100 | max 1300||2x stroke + 50|
|2814||28 mm||14 mm||min 50 | max 650||min 100 | max 2500||2x stroke + 50|
|4020||40 mm||20 mm||min 100 | max 800||min 100 | max 5200||2x stroke + 90|
|4014||40 mm||14 mm||min 100 | max 600||min 100 | max 2800||2x stroke + 90|
|4010||40 mm||10 mm||min 100 | max 500||min 100 | max 1300||2x stroke + 90|
Click here for possible end fittings
Almost all gas springs can be fitted with the following options: For all possible options and combinations, we can inform you.
This type does not use oil for damping but a specially produced groove in the cylinder. With dynamic damping it is possible to mount the gas spring in any position and still have damping.
FDA Approved oil
Mainly for the food industry, we can produce our gas springs in FDA approved quality.
All speeds are available on request.
a Certain amount of friction can be used to position your application in any angle, like stop and stay.
Lock in | Lock out
a Special developed internal mechanism can lock the gas spring in extended or compressed position.
Mechanical lock to position the gas spring in any position.
Gas springs can be equiped with Viton seals when exposed to high temperature or used in agressive environment.
Simple protection against large pulling forces on the gas spring and therefor the application.
Safety tube (push top)
Mechanical lock in fully extended position.
Tube to protect the piston rod against mechanical impact.
Extra protection cap for the seal. Can also be used as extra scraper.
Next to standard black or white/alu (RAL9006) we can produce the gas spring in almost any desired color on request.
Do you already have the right specifications of the gas spring, than you can donwload the “Black Box” drawing, fill in the missing measurements and send back to us. With this specifications we can offer you our substitution gas spring.
Wondering which product you can use best in your application? Let us know your wishes and we will make a tailor-made calculation for you. Fill in the contact form below or contact us on +31 0320 769 103.